Welcome to my 1998 Acura Integra Type R OEM HID Retrofit!
If you have any questions or need help please check out hidmod.com/forums.
Step #1 - Bumper Removal
--------------------
- Remove 9 black screws lining the top of the bumper with a philips
head screwdriver.
- Remove the 2 bolts on the left of the black strip and then ther other 2 on
the right.
- Remove the 2 bolts underneath the car that holds the bottom of the bumper
to the undercarriage.
- Remove the 2 screws that hold on the ITR lip (two on each side).
- Remove the screw that is right above the screws for the lip (holds the bumper
to the fender).
- Remove your turn signals (don't forget about the bulbs)..
- Pull the bumper off each fender carefully. There are a few plastic tabsholding
it into place.
- Carefully place bumper in a safe place.
If you need further instructions on removing the bumper please get a Helm's
manual (www.helmsinc.com).
Copyright © 2003-2008 hidmod.com
