Welcome to my 1998 Acura Integra Type R OEM HID Retrofit!
If you have any questions or need help please check out hidmod.com/forums.
Welcome to my 1998 Acura Integra Type R OEM HID Retrofit!
If you have any questions or need help please check out hidmod.com/forums.
TOOLS
AND MATERIALS
--------------------
-
Dremel
- Sanding Drums
- Cutting Blades
- Drill with 1/4" Drillbit
- Wirecutters/strippers
- (2) 20A Fuses
- (8) 1/4" bolts (Long bolts) / Locknuts
- Handful of 1/4" Washers
- 1/4" x x035 Round Aluminum (R/C Car Exhaust Piping)
- Electrical Tape
- Heat Gun
- Soldering Iron / Solder
- Shrink Wrap
- High Temperature Black Silicone
- All Clear Purpose Seatant
- Toolbox with Various tools
|
It is strongly suggested that you have an extra set of hands to help you out with this swap and make sure you have a lot of free time. Don't attempt if you are limited on type (like a single afternoon). You will most likely only have one set of headlights and you can't drive in the dark without headlights so give yourself a lot of time! |
| Next Step -> Bumper Removal
|